In recent years, inverter pool heat pump market continues to thrive with an annual growth rate of 50%. So, what is inverter pool heat pump and why is it so popular?
Simply speaking, inverter enables pool heat pump to adjusts the heating capacity from 25% to 100% automatically , but most of the time, it mainly runs by middle& low compressor frequency in its design principle, which leads to higher COP, lower sound level and longer working life.
A few days before starting to heat the pool water, inverter pool heat pump will run at 100% capacity. The purpose is to heat the water to the set temperature faster. After that, the heat pump will run at a reduced capacity enough to maintain the required temperature.
| Day 1 to Day 5Heat up to set pool temp | Day 6 to Day 180maintain pool temp | |
| Capacity | 100% | Average 50% capacity |
| COP at A26℃/W26℃/H80% | 7.0 | Average 10 |
| COP at A15℃/W26℃/H70% | 4.8 | Average 7 |
PS: Normally, the pool temperature drops 0.5~1.5℃ daily, 50% capacity of a Full-inverter HP is sufficient to heat up the pool by 1.5~2.2℃ in 15 hours running with the right mode selection.
Among so many pool heat pumps, why does Aquark inverter heat pump gain popularity? What are its advantages?
There are mainly three advantages of Aquark inverter pool heat pump:
COP up to 16: Unlike on/off pool heat pump, Aquark inverter pool pump adjusts the heating capacity from 25% to 100% automatically, the COP at low speed is up to 16.
Dreaming Silence: Thanks to the Aquark unique backward airflow technology and Stepless DC inverter technology, the sound level of Aquark heat pump is reduced to 40dB(A) at 1 meter, almost inaudible.
Double Energy Saving: intelligent running speed adjustment cuts your electricity bill greatly in the whole year. It helps you to save energy and protect our planet.
Do you get some idea about inverter pool heat pump now? Considering all benefit that inverter heat pump brings, isn’t it appealing to upgrade your pool with Aquark inverter pool heat pump?
